Brondell FreshSpa Easy Bidet - Manual (Page 8)

2) Turn off water supply valve and
flush
toilet
a. Turn off water supply at the wall to
stop flow of water.
b. Flush toilet and hold down handle
to completely empty toilet tank.
c. Disconnect water supply hose from
the fill valve under the toilet tank.
3) Connect 7/8” T-Valve to Water
Supply Line and Fill Valve Under
Toilet Tank.
a.Install the 7/8” T-valve with the
small rubber washer with raised lip
to the incoming water connection on
the bottom of your toilet tank. Be sure
to place the flat edge of the rubber
washer into the T-Valve against the
metal with the raised lip facing the
toilet tank connection.
b. Connect the cold water supply line
coming from the wall to the bottom
of the T-valve using the small flat
rubber washer (if needed).
Step 2a
Installation
6
Step 2c
Step 3a & 3b