CASO Germany INNO Slide 2100 - Manual (Page 43)

caso Inno Slide 2100 43
► Switch the appliance off after use. This avoids unnecessary use of energy, and ensures
your safety.
► If the appliance is unused for extended periods of time, we recommend that the appliance
be unplugged from the mains.
15.4 Operating the Appliance
15.4.1 Using the Touch Controls
• The controls respond to touch, so you don’t need to apply
any pressure.
• Use the ball of your finger, not its tip.
• You will hear a beep each time a touch is registered.
• Make sure the controls are always clean, dry, and that there
is no object (e.g. a utensil or a cloth) covering them. Even a
thin film of water may make the controls difficult to operate.
15.4.2 Switching Off
The complete appliance is switched off using the Master On/Standby switch (1).
Please note
► Note that the appliance’s fan continues to operate for a while after the appliance has
been switched off in order to dissipate the heat that has built up in the appliance.
15.4.3 Switching On
Plug in the device and the display shows “L” or “H”
► "H" means the surface temperature is high,"L" means low.
Press the Master On/Standby switch (1), the LED flash.
Place a suitable cooking pot with its contents to be cooked on the centre on the hob (Ø 120
mm - 260 mm).
15.4.4 Functions
15.4.5 Temperature Stage
Press the button “F” (5) and select “Temp.”
The indicator lamps An/standby and Temp light up, stage 4 is preset.
With the + / - Keys (2) or the Slider (6), you can change
the settings at any time in a range from 1 – 8.