CASO Germany MCG 30 chef - Manual (Page 63)

caso MCG30 Chef (pure white, black) 63

Setting the cooking time
Set the cooking time by turning the Time/Menu control dial.

Starting the cooking programme
After selecting the program, press the button Start /Quick start, to start the
preset cooking programme.
 End of the cooking programme
Once the end of the cooking time is reached, four signal tones will be emitted and END will
appear in the display.
13.14 “Microwave and Convection” mode
The device offers four pre-programmed settings, which facilitate combination cooking
using hot air (convection) and microwaves.

Setting the temperature
Select the temperature you require by pressing the Micro + Convection
button until you reach the level you require (see following table).
Setting the cooking time
Set the cooking time by turning the Time/Menu control dial.

Starting the cooking programme
After selecting the program, press the button Start /Quick start, to start the
preset cooking programme.

End of the cooking programme
Once the end of the cooking time is reached, four signal tones will be emitted
and END will appear in the display.
Please note
►
You can check the hot air temperature during cooking by pressing the
button Micro + Convection.
Button presses Display Temperature
1 200 200°C
2 170 170°C
3 140 140°C
4 110 110°C
13.15 “Multi-stage Cooking" Mode
In this mode you can program up to up to three automatic cooking sequences. The
sequence and duration of defrosting, microwave cooking and grilling or hot air mode is
adjustable.