13 cleaning and maintenance, 1 safety information, Attention – CASO Germany MG 25 menu User Manual

Page 59

Advertising
background image

caso MG25 Menu

59

Starting automatic defrost

After setting the defrost time, press the button Start/Quickstart, to start
automatic defrosting.

Please note

► Stop the oven occasionally to remove the unthawed frozen food or to separate it. If the

frozen food has not been defrosted at the end of the estimated defrosting time, proceed
as follows:

► Programme the oven in 100g increments, until the frozen food is completely defrosted.
► When using plastic containers out of the deep-freeze, the defrosting process should only

last long enough to be able to remove the frozen food out of the container, after which it
can be placed into a microwave-resistant container.

13 Cleaning and Maintenance

This chapter provides you with important notices with regard to cleaning and maintaining the
device. Please observe the notices to prevent damages due to cleaning the device
incorrectly and to ensure trouble-free operation.

13.1 Safety information

Attention

Please observe the following safety notices, before you commence with cleaning the device:
► The oven must be cleaned and food residues must be removed at regular intervals. If the

oven is not maintained in a clean condition, this will have a detrimental effect on the
service life of the device and can also result in a dangerous condition in the device as well
as in the growth of fungus and bacteria.

► Switch the oven off prior to cleaning it and unplug the plug from the wall power outlet.
► The cooking chamber is hot after it is used. There is a danger of burns! Wait until the

device has cooled down.

► Clean the cooking chamber after use as soon as it has cooled down. Extended waiting

unnecessarily complicates cleaning and can make it impossible in extreme cases.
Excessive accumulations of dirt can even damage the device under certain
circumstances.

► If dampness penetrates into the device, this can damage the electronic components.

Please ensure that no liquid can enter the interior of the device through the ventilation
slots.

► Do not use any aggressive or abrasive cleaning agents or solvents.
► Do not scrape off stubborn dirt with hard items.

Advertising