CASO Germany WineControl - Manual (Page 27)

caso WineControl 27
13.1.2 Operating the Device
To enjoy a perfectly chilled or warmed wine, follow these 6 simple steps:
Pick up the WineControl carefully and place it on a dry and stable surface. Ensure that the
adaptor is attached to the wine cooler.
Place the bottle into the wine cooler.
Put the appliance at either angle 15º, or angle 85º.
Note: You may choose either angle 15º,or angle 85ºdirection when operates for different
kinds of wine. It is suggested that you put the device at angle 85º for chilling wine, the
device work more effectively at the angle 85º direction.
Put the switch “on’ and put the knob to desired temperature.
You can put the knob to set the temperature to “5”to fully chill;
You can put the knob to set the temperature to “50”to fully warm.
Turn the knob to the left to reduce the temperature, turn the knob to the right to
increase the temperature.
When the drink is chilled or warmed to the suitable temperature, put the power switch ‘OFF’
and unplug the adaptor from the wine cooler. Bring the WineControl to the table or to
wherever desired and use it.
Please note
► The WineControl stores the desired temperature for a period of time, depending on the
ambient temperature.
Should for any reason you need to change desired temperature, then plug the WineControl
into outlet again. After this you can slowly slide the switch direction until the desired
temperature is reached.
Digital Temperature Display
Temperature Regulating
Knob