CASO Germany Scale K3 - Manual (Page 17)

caso Küchenwaage K 3 17
12.3.3 Time setting
The system is under the state of time. Press „MODE“ for a while.
Minute will twinkle on the display, then press „g/Oz“
slightly, setup the minutes.
Press „MODE“ slightly, hour will twinkle on the display. Press „g/Oz“
slightly, setup the hours.
After finishing the setting, press „MODE“, then the LCD
display shows the new time.
12.3.4 Countdown Timer setting
The system is under the state of time. Press „MODE“to enter countdown timer setting
state, „TMR” will appear on the display. Press “MODE” for a while and the
seconds will twinkle on the display, then press „g/Oz“ slightly to setup
the seconds.
Press „MODE”, the minute will twinkle on the display. Press „g/Oz“
slightly, setup the minutes.
After finishing the setting, press „MODE“, to count the time. After finishing the
countdown “00:00” will appear on the LCD display.
An alarm signal is send out. Press “MODE” slightly to stop the alarm.
Then press „MODE“ and return to the state of time.
To set the timer back to zero, press „g/Oz“ for a while.
12.3.5 Unit Exchange
Press the key „g/Oz“ you can select between „g“ and „oz“.
12.3.6 Over Load Indicator
When the scale is overloaded, „Err“ will appear on the display.