Catler KE 8010 - Manual (Page 13)

13 13
OPERATING YOUR VARIABLE TEMPERATURE KETTLE KE 8010
OPERATING YOUR VARIABLE TEMPERATURE KETTLE KE 8010
Before fi rst use
Remove and safely discard any packaging mate-
rial or promotional labels attached to your kettle.
It is recommended that before first use to fill the
kettle to the maximum level with cold tap wa-
ter, bring to the boil by selecting the BOIL BLACK
TEA 100° button, then discard the water. Your
kettle will only operate when positioned on the
power base. The kettle will automatically switch
off when the water has reached the selected
temperature.
Operation of your kettle
1. To fill the kettle, remove the kettle from the
power base and open the lid by pressing the
lid release button. Fill with the desired amount
of water. Always fill the kettle between the
minimum (MIN – 500 ml) and maximum (MAX
– 1700 ml) marks on the water window. Too little
water will result in the kettle switching off before
the water has boiled or reached the selected
temperature.
2. Ensure the lid is closed and locked firmly into
place. Position the kettle securely onto the pow-
er base. Insert the power plug into a 230/240 V
power outlet and switch on.
The START/CANCEL and BOIL BLACK TEA 100°
button surrounds will illuminate in blue for one
minute. A beep will sound for two seconds.
The START/CANCEL button surround will auto-
matically switch off after one minute if not se-
lected.
NOTE:
If the START/CANCEL button is pressed
(before selecting a
temperature but-
ton), the START /CANCEL button sur-
round will illuminate in red and the
BOIL BLACK TEA 100° button surround
will illuminate in blue and the kettle will
start heating.
3. Select the desired water temperature by
pressing one of the five variable Celsius tem-
perature buttons (80°, 85°, 90°, 95°, 100°). The
selected button and the START/CANCEL button
surround will illuminate in blue.
NOTE:
The KEEP WARM function can be select-
ed before, during or on completion of
the water heating cycle (refer page 9).
4. Press the START/CANCEL button and the
surround will illuminate in red, the selected tem-
perature button surround will illuminate in blue
and the kettle will start heating. Do not remove
the kettle from the power base during operation.
Ensure the kettle has switched off after the water
has boiled or the selected temperature has been
reached before removing the kettle from the
power base. If the kettle is removed from the
power base during the KEEP WARM function the
kettle will automatically switch off.
5. When the kettle has heated the water to the
selected temperature, 3 beeps will sound, the
START/CANCEL button surround illumination
will switch off, and the selected temperature
button surround will illuminate for 1 minute be-
fore switching off.
6. If the KEEP WARM function has been select-
ed, the KEEP WARM button surround will remain
illuminated in red, the selected temperature but-
ton surround will remain illuminated in blue, and
the kettle will continue to cycle on and off for
20 minutes.
7. If further heating of the kettle is not re-
quired, switch off at the power outlet, unplug
the power cord and empty the water from the
kettle. Replace the kettle onto the power base.