BoonDocker YAMAHA: Non-turbo Control Box Apex - Manual (Page 3)

BoonDocker – 2379 Heyrend Way Idaho Falls, Idaho 83402 – 208-542-4411 / 877-522-7805
www.boondockers.com – email: [email protected] – fax: 208-524-7381
Revised 07-18-07 Page 3 of 16
A. Intro / Startup Screen
When the box is first turned on (by the engine or battery), the Intro screen is displayed. Press any key to go to the
main menu. An example Intro screen display is shown below:
Yamaha Apex 1000
v:4B5gBD N2O:ADJ
In the example shown above, this screen displays the following information:
Yamaha Apex
Sled model. This box is designed for the Yamaha Apex. Boxes for other sleds will
have other lettering.
4B5gBD
This is the software version of the box. The box can be reprogrammed only by sending
the box back to Boondocker
N2O:
Shows that this Control Box is nitrous capable.
ADJ
Nitrous pressure regulator type (refer to Nitrous Section for more description)
B. Main Menu
The Main Menu is shown below:
Main

Fuel Stats
Menu N2O Map1U
The current selection is shown by the Right-Arrow and the cursor (underscore below the “F”). Use the arrow keys to
move the cursor. Move the cursor to the desired selection and press the “SEL” key to select the desired menu option from
one of the following:
Fuel Go to the Fuel adjust menus (see Section 1).
Stats Display runtime data, captured data, and recorded maximum data (see Section 3).
N2O Menus for optional Boondocker Nitrous kit (see Chapters VII and IX..).
Map Go to the Map menu (see Section 2)
The current Map number is displayed as “Map1U”. This indicates that map number 1 is being used and it is Unlocked.
1. Fuel Adjust Menus
This selection is used to make fuel adjustments. There are four Fuel adjust screens (examples shown below). The first
screen comes up after selecting Fuel.
Fuel screen1: M1L Id LO MD
3000 00 00 00
Fuel screen2: M1L LO MD HI
6000 00 00 00
Fuel screen3: M1L LO MD HI
8500 00 00 00
Fuel screen4:
M1L LO MD HI
10K5 00 00 00
Use the Up/Down Arrow keys to change the settings. Use the Left/Right Arrow keys to switch between the LO/MD/HI
settings. Go to the next adjustment screen by pressing the “SEL” button. After pressing the “SEL” on the last Fuel adjust
screen, you will return to the Main Menu.