Climadiff VSV12K - Manual (Page 18)

18
9. IN THE EVENT OF A BREAKDOWN
Despite the care we take during production, a breakdown can never be totally ruled out. Before contacting your
retailer’s after-sales department, please check that:
- the appliance is properly plugged in;
- there is not a power cut in progress;
- the breakdown is not one of those described in the table at the end of this manual.
IMPORTANT:
If the power cable supplied is damaged, it must be replaced by the manufacturer, a service centre approved by
the brand or the retailer. In all events, it must be replaced by qualified personnel in order to avoid any risk of
injury.
I F THESE CHECKS REVEAL NOTHING , THEN CONTACT YOUR RETAILER
’
S A FTER -S ALES D EPARTMENT .
CAUTION!
Unplug the appliance before carrying out any maintenance or repair work.
10. PROBLEMS AND SOLUTIONS
You can solve many simple problems with your temperature control cellar, thus avoiding having to contact your
after-sales department. Try the following suggestions.
PROBLEM POSSIBLE CAUSE
Appliance not running Check the voltage of the installation
Check your circuit breaker
A fuse has blown
Not cold enough Check the temperatures set
The ambient temperature means that the
temperatures need to be adjusted
The door is being opened too frequently
The door is not properly closed
The door seal is not sealing correctly
Insufficient free space around the appliance
No interior light Contact your after-sales department
The appliance seems unusually noisy Check that the appliance is level
Check that a piece of paper or part of the
packaging has not remained trapped inside
The door does not close correctly Check that the appliance is level
The doors have been reversed and incorrectly
fitted
The seal is in a poor condition
The feet have “moved”
The LED does not light The control panel is defective
Printed circuit board problem
Mains plug problem
In such cases call a qualified professional
LED display error Poor display quality
Temperature does not display
In such cases call a qualified professional
The fans are not running Control panel to be replaced by a qualified
professional