Code 3 21TR Plus MC - Manual (Page 8)

Secondary Take Down And Alley Light Modules:
Selecting Secondary Take Down and Alley Light Functions:
If the light bar is confi gured with Multi-Color lightheads in the Front:
The Front Cut wire (GRN/WHT) can be confi gured to activate the Front Multi-Color lightheads as a Second Take Down
mode (see Table 8).
The Take Down wire (ORG/BLK) may also be confi gured to activate the Front Multi-Color light heads as a Third Take
Down mode (see Table 11).
If the light bar is confi gured with Multi-Color lightheads in the Corners:
The Rear Cut wire (BLU/BLK) can be confi gured to operate Second Right Alley mode (see Table 9).
The Right Alley wire (RED/WHT) can be confi gured to operate Thrid Right Alley mode (see Table 12).
The Cruise wire (GRN) can be confi gured to operate Second Left Alley Light mode (see Table 10).
The Left Alley wire (BLK/WHT) can be confi gured to operate Third Left Alley Light mode (see Table 13).
Other programmable functions include:
The Rear Cut wire (BLUE/BLK) can be confi gured for multiple Rear Work Light functions (see Table 9 for work light
options).
The Cruise wire (GRN) can be confi gured for multiple Cruise functions (see Table 10 for cruise options).
NOTE: If the Front Cut wire (GRN/WHT) is confi gured to activate the Front Multi-Color lightheads as Secondary
Take Downs, the standard Front Cut function will be disabled. If the Rear Cut wire (BLU/BLK) is confi gured to
activate the Corner Multi-Color lightheads as Secondary Alley Lights, the standard Rear Cut function will be
disabled. If the Cruise wire (BLU/BLK) is confi gured to activate the Corner Multi-Color lightheads as Secondary
Alley Lights, the standard Cruise function will be disabled.
STEP 1:
Power up the light bar. Select one of the following:
For second mode; Front Cut function (GRN/WHT) or the Rear Cut function (BLU/BLK) or the Cruise function (GRN) by
applying +power to the appropriate wire. Programming will not work if more than one function is selected at a time.
For third mode; Take Down function (ORG/BLK) or the Right Alley function (RED/WHT) or the Left Alley function (BLK/
WHT) by applying +power to the appropriate wire. Programming will not work if more than one function is selected
at a time.
NOTE: If the Front Cut wire (GRN/WHT) is confi gured for the Front Cut function, no lightheads will be activated
when +power is applied to the GRN/WHT wire. If the Rear Cut wire (BLU/BLK) is confi gured for the Rear Cut
function, no lightheads will be activated when +power is applied to the BLU/BLK wire.
STEP 2:
Continue applying power to the wire from Step 1. Refer to Table 8 for the available Front Cut functions, Table 9 for the
available Rear Cut Functions, Table 10 for the available Cruise Light functions, Table 11 for Take Down functions, Table 12
for Right Alley functions, or Table 13 for Left Alley functions.
To increment to the next function, momentarily hold the BLK/RED wire to +power for less than two seconds and then
release. The four corner light heads will turn on steady to indicate that the function has been incremented.
To decrement to the previous function, momentarily hold the BLK/RED wire to +power for two to four seconds and
then release. The four corner light heads will turn on steady and then turn off to indicate that the function has been
decremented.
After the BLK/RED wire has been released, the new function will begin to operate and is automatically stored each time.
NOTE: To restore the Factory Default Secondary Take Down and Alley Light Functions, hold the BLK/RED wire
to +power for more than four seconds. The four corner light heads will turn on steady, turn off and then turn
on steady again to indicate that the Factory Default Secondary Take Down and Alley Light Functions have been
restored. The default function for the Front Cut, Rear Cut, Cruise, Take Down, Right Alley, and Left Alley wires is
function number 1 as shown in Tables 8, 9, 10, 11, 12, and 13. Only the function that is activated will be restored.
STEP 3:
Repeat steps 1 through 2 for the Front Cut function, Rear Cut function, Cruise function, Take Down, Right Alley, and Left
Alley as desired.
8