Celluon BLUETOOTH CL800BT - Manual (Page 47)

CL800BT MANUAL
47
Power Save Mode
Select the Power Save Mode Off checkbox to disable Power
Save Mode, or deselect the checkbox to run Power Save
Mode.
Standby Mode
Change the Standby setting value to alter the time elapsed
before the system enters Standby mode. In Standby mode, if
no keys are pressed within a given period of time the device
will enter a low power mode until a key is pressed again.
Wakeup Mode
To use the keyboard again, press any key or area of the
keyboard. Change the Wakeup Response settings to adjust
the speed for switching between Standby and normal mode.
Power OFF Mode
Once in Standby mode, if no keys are pressed within the time
specified in the Turn Off After field, the device will enter Power
OFF mode, as shown in Figure 13. To use the keyboard from
Power OFF mode, turn the Projection Keyboard on again.