Code 3 WingMan for Crown Victoria - Manual (Page 4)

4
FIGURE 3
Step 3 Position the mounting brackets and thread the self tapping screws into the existing holes in the Crown Vic's
sheet metal (see figure 3). Tighten the screws until the bracket crushes into the headliner material slightly (about as
deep as the thickness of the brackets) but not so tight that the brackets can't be adjusted to line up with the mounting
holes in the WingMan's outer panel.
FIGURE 4
Step 4 Position the Upper WingMan behind the mounting brackets and thread the two 1/4"-20 x 1/2" lg philips head
screws and internal tooth lock washers into the mounting holes in the outer panel of the WingMan (see figure 4).