Laser information, Modem notices, Important safety instructions – Compaq 3000 Series User Manual

Page 12: Laser information –8, Modem notices –8, Important safety instructions –8

Advertising
background image

1–8

Regulatory and Safety Notices

Regulatory Notices

Laser Information

Laser Type: Semiconductor GaAlAs
Wave Length: 780

± 35 nm

Divergence Angle: 53.5

° ± 1.5°

Output Power: Less than 0.2mW or 10,869 W·m

-2

sr

-1

Polarization: Circular
Numerical Aperture: 0.45

± 0.04

Only authorized technicians trained by Compaq should attempt to
repair this equipment. All troubleshooting and repair procedures
are detailed to allow only subassembly/module level repair.
Because of the complexity of the individual boards and
subassemblies, no one should attempt to make repairs at the
component level or to make modifications to any printed wiring
board. Improper repairs can create a safety hazard.

Modem Notices

Important Safety Instructions

Å

WARNING: When using this device, basic safety precautions should

always be followed to reduce the risk of fire, electric shock, and injury

to persons, including the following:

Do not use this product near water, for example, near a bathtub,

wash bowl, kitchen sink or laundry tub, in a wet basement or

near a swimming pool.

Avoid using this product during an electrical storm. There may

be a remote risk of electric shock from lightning.

Do not use this product to report a gas leak in the vicinity of

the leak.

Always disconnect the modem cable before opening the

equipment enclosure or touching an uninsulated modem cable,

jack, or internal component.

If this product was not provided with a telephone line cord, use

only No. 26 AWG or larger telecommunication line cord in order

to reduce the risk of fire.

Do not plug a modem or telephone cable into the network

(RJ-45) jack.

SAVE THESE INSTRUCTIONS

307504-001.book  Page 8  Thursday, August 29, 2002  9:28 AM

Advertising