Cuddeback AMBUSH FAMILY - Manual (Page 10)

Ambush ® IR/Black Flash: LEd ® IR/Black
&LASH
4HE
® firmware to improve its
performance. If a firmware update is required you
will need to download a firmware file from our
website. Instructions will be provided with the firmware.
Please see www.cuddeback.com for details. We
recommend you check our website for updates at
the beginning of your scouting season.

Setting Ambush ® Parameters
Some Ambush ® features can be changed by the user.
Ambush ® can also be programmed to become a time
lapse camera. (Note - In the text that follows the un-
derlined items are default settings. For most users these
settings are not required and you can leave PO set to 0).
Step 0: Enable or disable parameters OR select
Time Lapse Operation
&IRST
RECOMMENDED
P0:1
as desired
P0:tL = time lapse mode. Attack is put into time
lapse mode as explained later.
Step 1: Press the A key to display P1 (strobe flash power)
0
® (This setting is
ignored on the Ambush ® IR/Black Flash and will be displayed
as P1:--)