Dave Smith Instruments MOPHO KEYBOARD - Manual (Page 51)

Transmitted Channel Messages
Status Second Third Description
1000 nnnn 0kkkkkkk 0000000 Note Off.
1001 nnnn 0kkkkkkk 0vvvvvvv Note On.
1011 nnnn 0vvvvvvv 0vvvvvvv Control Change; see “Transmitted Controller
Messages” table following
1100 nnnn 0ppppppp Program change, 0 – 127 for Programs 1 – 128
within current Bank
1101 nnnn 0vvvvvvv Channel Pressure
1110 nnnn 0vvvvvvv 0vvvvvvv Pitch Bend LS Byte then MS Byte
Notes:
0kkkkkkk Note number 0 - 127
nnnn Channel number 0 to 15 (MIDI channel 1-16). Ignored if MIDI
channel set to ALL
0vvvvvvv Value
Transmitted Controller Messages
Status Second Third Description
1011 nnnn 0000 0001 0vvvvvvv Mod Wheel
1011 nnnn 0000 0010 0vvvvvvv Breath Controller – when assigned to Pedal/CV
1011 nnnn 0000 0100 0vvvvvvv Foot Controller – when assigned to Pedal/CV
1011 nnnn 0000 0111 0vvvvvvv Volume – when assigned to Pedal/CV
1011 nnnn 0100 1010 0vvvvvvv Brightness – when assigned to Pedal/CV
1011 nnnn 0000 1101 0vvvvvvv Expression – when assigned to Pedal/CV
1011 nnnn 0010 0000 0vvvvvvv Bank Select – 0 to 2
1011 nnnn 0100 0000 0vvvvvvv Damper pedal – sends 0 if off, 0100 0000 when
on
1011 nnnn 0000 0111 0vvvvvvv Volume knob
See sections below for additional Continuous Controller (CC) and Non-
registered Parameter Number (NRPN) messages transmitted.
45