Campbell Hausfeld DG190300CK - Manual

16
Notes
Notes
Notas
DG190300CK Operating Instructions and Parts Manual DG190300CK k
Hand Drill
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain
the product described. Protect yourself and others by observing all safety information. Failure to comply with
instructions could result in personal injury and/or property damage! Retain instructions for future reference.
Description
The hand drill is made for drilling,
honing, reaming, hole sawing and wire
brushing. The drill operates at high
speed making the tool useful in drilling
metal and pilot holes to reduce wood
splitting when installing screws. The
keyless chuck provides fast and
convenient drill bit changes.
Unpacking
When unpacking this product,
carefully inspect for any damage that
may have occurred during transit.
General Safety
Information
This manual contains information that is
very important to know and understand.
This information is provided for SAFETY
and to PREVENT EQUIPMENT PROBLEMS.
To help recognize this information,
observe the following symbols.
Danger indicates
an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
Warning indicates
a potentially
hazardous situation which, if not avoided,
could result in death or serious injury.
Caution indicates a
potentially
hazardous situation which, if not avoided,
may result in minor or moderate injury.
Notice indicates
important
information, that if not followed, may
cause damage to equipment.
CALIFORNIA PROPOSITION 65
You can
create
dust when you cut, sand, drill
or grind materials such as
wood, paint, metal, concrete,
cement, or other masonry.
This dust often contains chemicals
known to cause cancer, birth defects, or
other reproductive harm. Wear
protective gear.
! DANGER
NOTICE
! CAUTION
! WARNING
! DANGER
IN713201AV 10/06
For parts, product & service information
visit www.chpower.com
BUILT TO LAST
© 2006 Campbell Hausfeld/Scott Fetzer
See Warranty on page 5 for important information about commercial use of this product.
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
Specifications
Tool
Voltage 120V 60Hz
Power Rating 4 Amp
No Load Speed 0 - 2600 rpm
Chuck Size 3/8”
Max Bit Size 3/8”
This product or its
power cord contains chemicals known
to the State of California to cause
cancer and birth defects or other
reproductive harm. Wash hands after
handling.
The following safety precautions must
be followed at all times along with any
other existing safety rules.
1. Read all manuals
included with this
product carefully. Be
thoroughly familiar
with the controls and
the proper use of the equipment.
2. Only persons well acquainted with
these rules of safe operation should
be allowed to use this tool.
Safety
glasses and ear protection
must be worn during
operation.
! WARNING
! WARNING 3. Do not wear loose fitting clothing,
scarves, or neck ties in work area.
Loose clothing may become caught
in moving parts and result in serious
personal injury.
4. Do not wear jewelry when
operating any tool. Jewelry may
become caught in moving parts and
result in serious personal injury.
5. Always use attachments designed
for use with this tool. Do not use
damaged or worn attachments.
6. Never trigger the tool when not
applied to a work object.
Attachments must be securely
attached. Loose attachments can
cause serious injury.
MANUAL