Dynojet 250ix: Extended Carriage and Trike Adapter Assembly - Manual (Page 10)

Extended Carriage with Trike Adapter Assembly Installation Guide
6
E X T E N D E D C A R R I A G E W I T H TR I K E A D A P T E R A S S E M B L Y I N S T A L L A T I O N
I NSTALLING THE E XTENSION S UPPORT AND T RIKE C ARRIAGE A DAPTER A SSEMBLY
1 Secure the left and right brackets to the extension support brace mount using two
3/8 x 1-inch hex bolts and two 3/8-16 nylock nuts each.
2 Secure each leveling mount using two 3/8-inch nuts.
Figure 3: Assembling the Extension Support Brace
KU072
extension support
brace mount
bolts
right bracket
nylock nut
leveling mount
hex nut