Dynojet 248x: Pit Installation Guide - Manual (Page 5)

Document #98219100 1 - 1
Chapter 1
Initial Setup
and Requirements
Thank you for purchasing the Dynojet Automotive
Dynamometer. This document will give you the
information you need to install the Dynojet
Dynamometer (pit model). If you have any questions
please call Dynojet at (800) 992-4993.
Introduction
Before installing your Dynojet Dynamometer,
there are a few factors to consider. This chapter
“Initial Setup and Requirements” is a brief
overview of what you need to know to install your
Dynamometer and an overview of the installation
steps. Comprehensive instructions are included in
the remaining chapters. “Initial Setup and
Requirements” should help you decide where to
place your Dynamometer, where to place the
Dynojet electronics, what you need to unload
your Dyno, how to prepare your Dynamometer
pit and what must be provided for the
Dynamometer.