Dynojet 248x: DynoTRAC User Guide with Variable Brake - Manual (Page 5)

Document #98111100 3
File and Option pull-down menus
File
The exit program option can be found in the
File pull-down menu. You can also exit the
program by clicking the X button in the far
upper right corner of the main screen.
Option
Click on Control to select a gauge.
Click on Gauge to bring up the Gauge
Configuration Window.
Click on Step to bring up the Step Size
Window (Step Size is the amount the value in
the Target Value Text Box is increased or
decreased when an UP or DOWN Arrow is
Clicked on or the up or down arrow key on
the keyboard is pressed ).
Click on Rev Limit to toggle this option on
or off.
Speed Gauge
When the user selects the Speed gauge the
braking will be based on the speed value in the
Target Value Text Box.
RPM Gauge
When the user selects the RPM gauge the
braking will be based on the RPM value in the
Target Value Text Box.
Brake Percentage Gauge
When the user selects the Brake% (Percentage)
gauge the braking will be set to the value in the
Target Value Text Box.
Temperature Gauges
These gauges display the brake and tire
temperatures, when the appropriate sensors are
connected.