Dynojet Snowmobile Dynos: Sled Dyno Hub Replacement - Manual (Page 3)

Document # 98263100 1
Install Guide
Dynojet Sled Dynamometer Hub Replacement
The following steps will guide you through the replacement of the hubs
on your sled dynamometer.
Step 1
Remove the guards.
• Remove the track guard.
• Loosen the button head cap screws on the guards.
• Pull the guards off the arms.
Note: Do Not Loosen the chain tensioner bolts !
Warning: Do Not remove the parts from the spline shaft. The hubs
are setup and ready to install.