Important safety information – Dyras CWT-2018 User Manual

Page 3

Advertising
background image

EN

CWT-2018

CWT-2018

4

5

User manual for cordless kettle model dyras CWT-2018

NOTES

Please read the instruction manual thoroughly before using your new appliance. It is important to keep these
instructions as a useful reminder that’ll help you enjoy the many features available. The manufacturer is not
responsible if the appliance becomes damaged or defective as a result of the user not following the information
included in the instruction manual. If the appliance becomes faulty during regular use, it should only be repaired
by an authorised service engineer.

IMPORTANT SAFETY INFORMATION

The following safety instructions must be followed when using the appliance. Please read this section
very carefully!

Of course, it’s not possible for us to anticipate or provide safety rules for every specific situation, so we ask you to
apply commonsense precautions when using the appliance in a situation that isn’t described below.

• This appliance has been designed for household use only, no other (heavy duty) uses are permitted.

• Never use the appliance outdoors.

• This device is not supposed to be used by physically or mentally handicapped people, or persons without

experience or knowledge (including children, as well), unless such a person supervises or guides their use of
the device, who is at the same time responsible for their safety. As for children, supervision is recommended
to make sure that they do not play with the device. This device is not supposed to be used by children under
the age of 14, not even with supervision!

• Never use an appliance or accessory that the manufacturer did not supply with or propose for use with the

appliance. The use of such appliances might lead to accidents or irregular function.

• Don’t put the appliance near hot objects (e.g. oven, hob, heating appliance etc.) or on any hot surface.

Don’t place the appliance anywhere it could slide down, fall or be knocked off accidentally.

• Don’t use the appliance in the presence of explosive or inflammable gases, vapours or liquids.

• Please avoid using the appliance in any place where it would be subjected to high temperatures, low

temperatures, physical shocks or vibration. The appliance is designed to be operated and stored in a situation
where temperatures are between +5° and +40° Celsius. Do not use the appliance in a wet or humid
environment.

Dear Customer,

All electrical and mechanical equipment needs to be cared for appropriately. It’s important to

note that using or storing the appliance in certain conditions may adversely affect its lifespan and

functionality. Always protect the appliance from the conditions listed below.

Using or storing the appliance in a wet, humid or damp environment can cause:

– deterioration and premature aging of the cover and electric insulation of the appliance,

– premature wearing and aging of the plastic and rubber components,

– rust and corrosion affecting electrical components and metal parts.

Using the appliance in a dusty environment or in the kitchen (where the air may be contaminated

with vapours from cooking oil or grease) can cause:

– greasy dust coatings on the mechanical and electrical elements and the casing of the

appliance, which could result in electrical contact failure or even complete breakdown, and

could also damage the plastic and rubber elements.

The effects of direct sunlight on the appliance can include:

– accelerated deterioration of the appliance casing and its plastic and rubber components,

damage to strength and other structural features. The appliance’s surface may become porous

and fragile, which may result in a safety risk.

Storing the appliance in cold or frosty environment may cause:

– damage to the plastic and rubber components; if they become fragile, this may result in a

safety risk.

– oxidation resulting from condensation, and corrosion of the metal components.

Direct and indirect heat (e.g. being too close to an oven or a heating appliance) can cause:

– damage, deformation, softening or melting of plastic or rubber parts and casing elements, or

deterioration of electrical insulation.

Following the operating instructions and avoiding any of the conditions listed above will help you

increase the lifespan of the appliance. The manufacturer is not responsible if the appliance is stored

inappropriately or contrary to these instructions. You are recommended to have the appliance

serviced regularly by an authorised engineer to keep it working for as long as possible.

Warning! Unplug the appliance from the plug when not in use. Before unplugging the

power cable, switch off the appliance then pull out the power cable from the wall (or

extension) socket.

• In order to avoid electric shock, never put the appliance into water or other liquids. Do not touch the appliance

with wet hands. Plugging and unplugging the supply cable must only be done with dry hands, and the wall
(or extension) sockets must also be dry.

EN

Advertising