Dyras SFH-200 - Manual (Page 6)

SFH-200
10
EN
SFH-200
11
COPYRIGHT
© Copyright The dyras wwe.factory LLC U.S.A.
All rights - including distribution by film, radio or television, translation, photographic or audio copying, abstract
reprint and other duplication - are specifically reserved. Any breach may result in legal action.
THE SYMBOL CE
This appliance meets the requirements for safety and electromagnetic compatibility (EMC). The relevant ‘CE’ mark
can be found on the nameplate, on the packing box and in the instruction manual.
Dear Customer,
Please visit our website at www.dyras.com where you can learn more about your appliance, new dyras products
and our activities.
You can also register your product online by completing the registration form on our homepage. Registration
offers a number of advantages:
• You’ll receive the latest information, news and recommendations about your new product, either by email or
by post.
• We will inform you about any changes to our service network and the availability of accessories and spare
parts.
• We’ll let you know if any new parts or accessories are available to improve your product (and, for electronic
equipment, if a software/firmware upgrade is available to enhance its functions).
• You’ll be the first to hear about any innovative, new products we release.
MAINTENANCE AND CLEANING
Attention! Before cleaning, always run the device in ventilation mode (switched to the “ ”
position) for about 3-5 minutes to ensure full ventilation of the device. Next, switch off the device
(switch to the “0” position) and unplug it from the mains power supply. Wait until the device has
cooled down completely before you start cleaning it.
• Clean the outside cover of the appliance with a damp, soft, lint-free cloth and then wipe the cleaned
surfaces with a dry lint-free cloth. Take care not to allow any moisture inside the cover. Let the appliance dry
completely before re-using or storing it.
• Clean the grids at the air inlet and outlet openings to remove any dust and dirt that has built up.
• When cleaning the appliance, never use solvent (acetone, benzole, petrol, alcohol, etc.) as these may solve
the casing material, or the internal parts of the appliance if they get into. Do not use cleaning agents with
coarse or grinding effect.
• Never remove the cover of the appliance.
• The heater should only be packed away for storage once completely cooled.
• If you don’t plan to use the appliance for a while after cleaning it, place it in a nylon bag and store it in a place
that is free from dust, damp and frost. Do not wrap the mains cable around the appliance when storing it
because the insulation can deteriorate or break under these circumstances.
QUALITY CERTIFICATION
It is hereby certified that heater with ventilator type dyras SFH-200 meets the below technical parameters:
Type: SFH-200
Name: heater with ventilator
Nominal mains voltage: 230 V ~ 50Hz
Maximum mains power consumption: 2000 W
Contact protection class: II.
Noise emission: L
WA
= 56 dB
Manufacturer: The dyras www.factory, Inc. U.S.A.
We are continuously developing our products to keep them up-to-date, which means the technical data of our appliances may change without
any prior notice. Errors and omissions excepted.
User'sManual for SFH-200.indd 10-11 User'sManual for SFH-200.indd 10-11 2011.06.15. 20:04:14 2011.06.15. 20:04:14