Eden EM275 - Manual (Page 9)

H I F I D E L I T Y F O R L O W F R E Q U E N C Y | 9
E D E N | M E T R O M I X S E R I E S | E M 2 7 5 - 7
EM275 Front Panel Navigation:
1. Input 1; Plug in instrument 1 to the amplifier.
2. Input 2; Plug in instrument 2 to the amplifier.
Note: This channel has an added distortion control for use with
electric guitar.
3. Gain Control; Adjust the input level for instrument 2.
4. Compressor bypass indicator; Illuminates when internal
compressor is bypassed for channel 2.
5. Compressor bypass; Use this switch to bypass the internal
compressor for channel 2 (tip: bypass the compressor when
using distortion with the channel).
6. Gain; Adjust the input level for instrument for instrument 1.
7. Distortion; Applied the desired amount of distortion for
instrument 2.
8. Bass Control Channel 1; Increase or decrease the level of low
frequencies applied.
9. Bass Control Channel 2; Increase or decrease the level of
low frequencies applied.
10. Middle Control Channel 1; Increase or decrease the level of
mid frequencies applied.
11. Middle Control Channel 2; Increase or decrease the level of
mid frequencies applied.
12. Treble Control Channel 1; Increase or decrease the level of
higher frequencies applied.
13. Treble Control Channel 2; Increase or decrease the level of
higher frequencies applied.
14. Pan; Choose how if you want to send more or less of
instrument 1 sound to the left or right speaker of the amplifier.
15. Pan; Choose how if you want to send more or less of
instrument 2 sound to the left or right speaker of the amplifier.
16. Channel 1 Level; Select the overall volume for this channel.
17. Channel 2 Level; Select the overall volume for this channel.
18. Channel 3 / 4 (stereo) input 1 (Ch3); Input an instrument such
as electronic drum kit or keyboard.
19. Channel 3 / 4 (stereo) input 2 (Ch4); Input an instrument such
as electronic drum kit, keyboard or MP3 player.
20. Channel 3 /4 level; Controls the overall volume for both inputs
for channels 3 / 4.
21. Master level; Control the output volume of the amplifier.
22. Headphone Level Control; Adjust the level for the headphone
Out 1.
23. Headphone Output 1; Plug in headphones.
24. Headphone Level Control; Adjust the level for the headphone
Out 2.
25. Headphone Output 2; Plug in headphones.
26. Headphone Level Control; Adjust the level for the headphone
Out 3.
27. Headphone Output 3; Plug in headphones.
28. Illuminated Eden logo; Illuminates when unit is switched on.
29. Power Switch; Turn your amplifier off and on.
EM275 Quick Start Guide
Providing the ability to practice and the power to perform the EM275 provides the ultimate solution for multi instrument amplification.
With the ability to plug in up to 4 instruments at once alongside a backing track via a stereo RCA input the EM275 allows groups of
musicians to practice and play together through just 1 amplifier. With 2 x 75W outputs the EM275 is a stereo amplifier allowing you to
not only just the levels but also pan channels 1 and 2 of the amplifier to mix your sound. Using Extended range speakers the EM275
provides a massive depth of tone making it suitable for many instruments.