Eden WTX500 - Manual (Page 8)

8 | H I F I D E L I T Y F O R L O W F R E Q U E N C Y
E D E N | W T X S E R I E S | W T X 2 6 4 - 6
WTX264 Front Panel Navigation:
1. Illuminated Eden logo; Illuminates when unit is switched on.
2. Input; Connect your instrument to the amplifier.
3. Tuner Mute Indicator; Illuminates when tuner mute is active.
4. Gain Control; Adjust the amount of input signal to the amplifier.
5. Tuner Mute Switch; Press to toggle tuner mute on / off.
6. Level Indicator; Use this to help set your input signal level this
should illuminate on your loudest/lowest notes.
7. Enhance Control; Providing Eden tone shaping use this control
to increase the amount of proprietary EQ sweep in your sound.
8. Effects Loop Send; Signal out.
9. Bass Level Control; Use this control to select the amount of
cut or boost you require in the low frequency range / pull control
to engage Bass Boost function to achieved added low end.
10. Effects Loop Return; Signal in.
11. Mid Level Control; Use this control to select the amount
of cut or boost you require in the mid frequency range / pull
control to move where in the mid frequency range mid cut or
boost is applied.
12. Auxiliary Input Left.
13. Treble Level Control; Use this control to select the amount of
cut or boost you require in the Higher frequency.
14. Auxiliary Input Right.
15. Limit Indicator; Displays when amplifier power output is
being reached.
16. Master Control; Adjust the overall output level of the unit.
17. Tuner Out, Connect your rack or foot pedal tuner here.
18. Standby Indicator; Illuminate to show protection circuit
is functional.
19. Protect Circuit Indicator; Illuminates when amplifier limit is
reached and protection circuit becomes active.
WTX264 Back Panel Navigation:
1. Power Inlet; Insert supplied power cord.
The WTX264 is designed to work across a range of voltages
from 90v up to 240v. The amplifier requires no modification to
do this simply plug your power cord and play.
2. Power Switch; Turn your amplifier off and on.
3. Footswitch; Connect optional footswitch here to toggle tuner
mute and enhance functions.
4. Recording DI Out; Take your DI line for a recording console or
desk from.
5. Ground Lift Switch; Switch ground lift feature for the XLR
Recording DI output.
6. DI Level Control; Adjust the output level of the DI.
7. Headphone Out; Connect your headphones to the amplifier.
8. ¼ Jack Output 1; Connect your amplifier to a speaker cabinet.
9. Speakon Output 1; Connect your amplifier to a speaker cabinet
Always ensure that that the total load for your amplifier does not fall
below the recommended 4 ohm impedance for this amplifier as it can
cause the protection circuit to engage and in some cases may damage
the amplifier.
WTX264 Quick Start Guide
The WTX264 provides the ability to easily take Eden tone and power with you in a compact portable package. Not only can you get great
tone and power out of this punchy little amplifier, but you also have access to an effects loop, auxiliary inputs and a flexible DI on the rear
of the amplifier.