Eden NC200A - Manual (Page 4)

4
ACTIVE LIGHT and COMPRESSOR ON/OFF SWITCH
This light indicates the best spot to operate the amplifier at. When the
compressor is engaged the light indicates compressor operation. When
the compressor is bypassed it indicates the sweet spot for operating the
amplifier. The compressor on/off switch engages and disengages the
Compressor.
ENHANCE CONTROL
This is a great sounding feature seldom fund on amplifiers at this price
level. The Enhance control is a complex tone Pre-shape that is set up to
optimize your bass sound. It is designed to boost the low frequencies
and upper midrange while at the same time reducing the midrange
frequencies. The Enhance control is a quick and easy way to a quality
bass tone . To try it out, set all the other tone controls to flat. Then
rotate the Enhance control to around 9:00 to 12:00 for the full effect.
This range is typically the best area for operation. The Enhance can also
be used with the other tone controls.
QUASI-PARAMETRIC TONE CONTROL
The single stage Quasi -Parametric control lets you dial into a specific
frequency range and boost or cut just that small part of the audio band.
The level control in the filter allows you to select the amount of boost or
the amount of cut you want . The Frequency control is tunable from
40Hz to 10 KHz. You can create many complex tone changes with this
control. The on/off switch allows you to compare your tone before and
after the changes you have selected. You can also bypass the
Parametric control section if you do not wish to use it.
MAIN TONE CONTROL 3 BAND
The main tone control section is a 3 band tone equalizer. The audio