EdgeWare FastGraph Version 3 - Manual (Page 9)

9
5) The second screen you will see is:
The setup program is asking the name of the drive and directory where FastGraph is to be
installed. The default is C:\FTGRAPH, and we suggest that you use the default directory
name. If the default is acceptable click on the button that resembles a computer and skip
to step 8.
6) If you need to change the drive letter or directory path click the Change Directory but-
ton and the following screen will appear:
This screen allows you to change the drive and or the path and directory. If you need to
change the drive, click on the Drives pull down arrow button to get a list of your drives to
select from. Once you have selected a drive, click on the drive folder to see a list of ex-
isting directories for installation or type a directory name in the Path box then click the
OK button.