EdgeWare FastBreak Pro Version 5 - Manual (Page 35)

35
ADJ % ANN % UPI MDD S/ Y Gen# Rob Strategy Beta Corr Alpha CAHPB LPKDESBR CB LE OEPR BE
7.66 19.95 1.4 28.73 32 1 1 MAM 1.55 0.94 15.8 NNYNYNNNNNNNNN NN YNNYNNN NN
6.74 21.67 3 17.21 64 1 0.9 MAM 1.69 0.95 18 NNNNYNYYNYNYNN NN NNNNNYN NN
3.45 19.03 2.1 16.83 110 1 0.9 MAM 1.1 0.91 16.7 NNNNYYYNYYYNYN NN YNNNNNN NN
7.41 19.91 3.1 15.38 58 1 1 MAM 1.53 0.9 17 NNNNYNYYYYYYNN NN YNNYNNN NN
The information in this file will be covered later when the optimizer is covered.
Using this option can result in quite a large file. Use with care.
To set the maximum number of generations to be tested, use the following field:
A typical value is 15 to 25 generations. When the FastBreak Pro optimizer reaches this
value, it will stop. Note: If a Restart file (described later) is reloaded, this value will be
ignored in the restart.
Saving FastBreak Pro Optimization Parameters
After you have input all your option choices, parameter ranges, and optimization criteria,
you should save the setup. Go to the FB Pro menu and select Save FB Pro Parameters:
This will allow you to save your setup in a file with a GPF extension.
It the future, you can reload this setup using the Load FB Pro Parameters option.