1" infill, Apply exterior weather seal – EFCO S5600 Structural Glazed User Manual
Page 24
Advertising
EFCO CORPORATION 7/2012 PART NO. Y306
Page 24 of 28
Series 5600 Silicone Structural Glazed Installation Instructions
Section VIII: Exterior Weather Seal
Apply Exterior Weather Seal
A.)
Install backer rod between the two infill units (insulated and monolithic).
B.)
Apply exterior weather seal as recommended by the sealant manufacturer.
1" INFILL
Note: Seal up to temporary retainers. After the structural sealant
cures, remove the temporary retainers and seal remaining gaps.
Backer Rod
Weather seal
Advertising