Series 406x storefront installation instructions – EFCO 406X Series User Manual
Page 25
Advertising
Series 406X Storefront Installation Instructions
EFCO 2014
Page 25
Section 5D. Glazing Adaptor
Glazing Adaptor
Use extrusion #21T8 to reduce 1” glazing pocket to a 1/4” glazing pocket.
Fill glazing vinyl pocket 1” in each direction at all four corners of opening.
Place adaptor as seen in Fig. #33(a). Using hand pressure or tapping of a 6” long wood block engage
adaptor snap.
Push/tap until level with frame as seen in Fig. #33(b).
Care must be taken not to bend the pocket reducer as it is being tapped into position.
21T8
(b)
(a)
Sealant
Location at
ends
Fig. #33
Advertising