Electric Eel RF - Manual (Page 6)

Model RF Manual (082610)_2-ColorREV.doc Page 6 of 16
(Refer to operating instructions
to free cleaning tool.)
7. NEVER force a tool and cable
into a pipeline blockage. This
may overload the cable or tool
and cause it to fracture.
8. ALWAYS wear HEAVY leather
gloves and safety glasses when
operating machine.
9. Use correct tool for the job or
application. Check the tool
listing for the correct tool and
line size.
10. To maintain safe and efficient
operation, thoroughly clean all
cables with water after use.
Acids in the drain and sewer
lines attack and deteriorate the
metal of the cables and tools.
Deterioration will cause
weakness in cable and tools and
result in fracture or breakage. A
light coating of oil applied to the
cable before storing will help
prevent rusting and premature
failure.
11. Replace all cables and tools that
become deteriorated, worn,
kinked, bent, or any other
damage that occurs.
MACHINE SET-UP
DANGER
TO PREVENT SERIOUS BODILY
INJURY:
NEVER USE ANY CABLE IN THIS
MACHINE OTHER THAN ELECTRIC
EEL 3/4” OR 5/8” DIAMETER
CABLE.
DISCONNECT POWER CORD
BEFORE ANY SET UP OR
MAINTENANCE IS ATTEMPTED.
This machine comes completely
assembled except for the cable guide
spring. Simply connect cable guide
spring to feeder with snap pin. (See
Figure #1)
Figure 1