ETS-Lindgren 3126 Precision Sleeve Dipole - Manual (Page 18)

18 Mounting Information www.ets-lindgren.com
Ferrite loaded RF cables are recommended for use with the Model 3126 to
minimize the interaction with the dipole. ETS-Lindgren offers a line of ferrite
loaded cables for this application. Lightweight RF cabling should be used and
properly supported to avoid putting unnecessary load on the SMA connector of
the antenna. Route cabling away from the antenna along the antenna axis for as
far away as is practical to minimize the interaction of the cable with the antenna
and to avoid distortion of the antenna pattern.