ETS-Lindgren 3164-10 Open Boundary Quad-Ridged Horn - Manual (Page 25)

www.ets-lindgren.com Mounting Instructions 25
5.0 Mounting Instructions
The Model 3164 Series antennas are precision
measurement devices. Handle your antenna
with care.
About Chamber Wall Mount
The Model 3164 Series Open Boundary Quad-Ridged Horns can be mounted
directly on the shield line of a shielded anechoic chamber.
When mounted, the SMA connectors on the 3164-10 and 3164-11 will
be located inside the chamber and must be routed by cables to
outside the chamber during installation.
M OUNTING F EATURES
 Chamber wall
mounting holes—
Equidistant holes
around the
circumference of
the adapter plate
accept 1/4–20
thread screws and
nuts for mounting to
a chamber wall.
Model 3164-08 shown