ETS-Lindgren SMART 1000 Mini-Reverb Cell User Manual
Page 30
Advertising
30
|
Shielding
Pan-Type Shielding
T
YPE
:
Pan-Type Systems—Euroshield (18 ga. steel or
aluminum)
D
ESCRIPTION
:
One layer of sheet steel or aluminum, joined with
M8 screws and double-row gasket in all mating joints.
O
PERATION
:
After the enclosure has been installed, the interior finishes should
not be changed. It is important that:
1.
Liquids are not spilled on the shielding.
2.
Only ETS-Lindgren RF penetration be used through the
walls, floors, and ceiling.
3.
All screws are tightened to 90-in lb torque. If screws are
removed, they must be reinstalled with the use of a
calibrated torque wrench or screw gun.
4.
Suspended floors are earthed with bonded contact to the
shield walls. Changing this bonding could affect the
chamber performance.
Advertising
This manual is related to the following products: