ETS-Lindgren 2081 Turntable Manual (Series 2081-2.0, 2081-2.5, 2081-3.0, 2081-4.0, 2081-5.0, 2081-6.0) - (Archived) User Manual
Page 20
Advertising
Operation
MODEL 2081 TURNTABLE SERIES
16
© ETS-LINDGREN L.P. – JANUARY 2003
REV D – PN 399212
degrees around. The display on the 2090 now reads 356.3 degrees
which is recorded.
The table is rotated CCW back to 0. The parameter button is set on
the “C” setting. The “C” digits display 3430. A new “C” setting is
now calculated:
New “C” = (356.3 divided into 360) times 3430 = 3395 (rounded
off)
Decrement the C parameter to 3395 and “ENTER” is pressed.
Then the “current position” button is pressed to get back to
operation mode.
The table is rotated from 0 to 360 and the mark is now within one
degree of being one full TT revolution. Calibration is complete.
Archived 3/18/10
Advertising