ETS-Lindgren 2088 EuroPro Electric Powered Turntable - (Archived 03/31/10) - Manual (Page 25)

MODEL 2088 ELECTRIC POWERED TURNTABLE Operation
© ETS-LINDGREN L.P. – JANUARY 2003 21
REV C – PN 399253
change to the next speed setting. The polarization LEDs will light
to indicate the speed selection in a binary fashion as shown below:
Speed 1: Both off
Speed 2: Top on, bottom off
Speed 3: Top off, bottom on
Speed 4: Both on
Each speed setting has its own individual overshoot compensation
value to provide proper overshoot correction for each speed
selection.
GPIB COMMANDS
The following GPIB commands have been added or modified:
Sn
Select Speed, where n is 1 or 2 for a two speed turntable
and 1-4 for a variable speed turntable.
S?
Query speed selection. Returns 1 or 2 for a two speed
turntable and 1-4 for a variable speed turntable.
SSn
Set Speed Value, where n is 1-4. This command is valid
only for a variable speed turntable. Valid speed values are from 1
to 255.
Command Usage: SSn <Speed>
Example: Output 708, "SS1 196;"
Query Speed Value, where n is 1-4. This command is
valid only for a variable speed turntable. Returns a speed value
from 1 to 255.
Command Usage: SSn?
Example: Output 708, "SS2?;"
Archived 3/31/10