FAB Defense PRG - Manual (Page 2)

Fig. 4
Step 3. Install the Lower Handguard as shown in
fig. 3 and fig. 4.
Fig. 3
- 2 - - 3 -
Step 4. Install the Upper Handguard and place the
Retaining Piece on the Handguard assembly. Sometimes
a plastic mallet is required.
Fig. 5
2
1
3
Step 5. Lock the Handguard assembly by closing the
Locking Lever as shown in fig. 6.
Fig. 6
Step 6. Complete rifle assembly.