Gastroback 42700 Design Coffee Electronic User Manual
Page 12
32
note: Make sure the am (in the morning) or pm (in the afternoon) indicator is properly
set. If the wrong symbol is displayed, press the Hour button to let the little hand move
around the clock for additional 12 hours.
3. After ca. 20 seconds without any key pressed, the coffeemaker will automatically switch
back to normal operation, the blinking program icon >p< will be deleted from the display
and the clock will return to the current time.
4. To check or change the auto brew start time, simply press the program button and the
pre-set start time will be shown on the LCD display and >p< blinks again. You can change
the adjusted start time as you like. With no buttons pressed, the display will automatically
return to the current time after ca. 20 seconds.
starting automatic operation
warning
: special care is necessary, when leaving any electrical appli-
ance unattended while connected to the power supply and during operati-
on. always ensure that the coffeemaker is prepared correctly and complete-
ly for a brewing cycle, according to the instructions in section preparing
some Cups of Coffee, before starting automatic operation, and leaving the
coffeemaker unattended, while connected to the power supply and during operation.
Especially ensure that the filter basket and glass carafe are inserted correctly and the cover
of the coffeemaker is closed properly.
note: Automatic operation is possible only, when clock and start time are adjusted. The
temperature setting of the warming plate used during brewing will be the same as what
was set during programming.
1. Ensure that you prepared the coffeemaker correctly and completely for the brewing cycle.
(See: ›Preparing Some Cups of Coffee‹)
warning:
ensure that the filter basket and glass carafe are inserted pro-
perly. The covers of coffeemaker and glass carafe must be closed fully. The
glass carafe must open the pause & serve mechanism.
2. Adjust the clock and select the desired start time. (See: ›Adjusting the Clock‹ and
›Selecting the Auto Brew Start Time‹)
3. Press the auTo on button. A green light will appear indicating that automatic operati-
on is on. The prepared brewing cycle will be started on the preselected time without any
further manual action.
Tip: You can switch off automatic operation quite easily by pressing the auTo on button
again. The green light will expire and the coffeemaker is in normal operation again.
When the brewing cycle starts, the green light on the auTo on button will go out and
the red light of the on/off button will be illuminated to indicate that the coffeemaker
is in operation. After the brewing cycle, the coffeemaker is in normal operation again,
keeping your coffee warm and displaying the Freshness Timer. (See: ›Freshness Timer‹ and
›Automatic Switching Off‹)
warning:
Before activating the automatic operation again by pressing
the auTo on button, always ensure that the coffeemaker is prepared com-
pletely and correctly for a brewing cycle!