Golden Eagle Cam Seal User Manual

Golden eagle mfg, Cam seal install, After removing the old plastic cam seal

Advertising
background image

Golden Eagle Mfg.

Cam Seal Install

Thank you for your purchase of Golden Eagle Mfg. products for your high
performance needs. You now own one of the best products on the market, all
100% made in the USA! We are very confident you will be more than pleased
with your purchase. If you ever experience any problems, have any concerns
or just want to give some advice, we would love to hear from you.
(909) 592 – 4311 or e-mail

[email protected]

After removing the old plastic cam
seal

(Refer to a shop manual for removal and replacement of the stock cam seal

)


1.

Prep the new Golden Eagle Mfg. Cam Seal by applying a thin layer of
clean engine oil to the o-rings.

2.

Place a thin layer of Honda Bond ( black silicone sealant ) on the cam
seal cap edges ONLY! Do not put any sealant on the cam seal or o-
rings!

3.

Put the Golden Eagle Mfg. Cam Seal in place and re-install the cam seal
cap torquing the bolts to factory spec.

4.

After following the shop manual cam seal install instruction, check for
leaks and make sure everything is in order.

Again, we thank you for your purchase and we are always here for your input.

Golden Eagle Mfg.
414 Borrego Ct.
San Dimas, CA 91773
Ph. (909) 592 – 4311
Web

www.GoldenEagleMfg.com

[email protected]

Advertising