Habey FW-1042 - Manual (Page 2)

Install Guide
Unpack all package contents and inspect each
component. Make sure all included parts and
accessories are present.
Step 1 - Inspect Contents
Using a phillips head screw driver, remove the four
screws on the sides of the enclosure.
Step 2 - Remove Top Cover
Remove the drive bracket
from the enclosure by
removing the screws at
the base of the bracket.
Mount the 2.5” drive on
the top of the bracket.
Mount the completed
bracket to the enclosure
Connect the Power and
SATA Cables,
Step 3 - Mounting a 2.5” Drive
Step 4 - Mounting a 3.5” Drive
Remove the drive bracket
from the enclosure by
removing the screws at
the base of the bracket.
Mount the 3.5” drive
on the underside of
the bracket. Mount the
completed bracket to the
enclosure.
Connect the Power and
SATA Cables.
Using a phillips head screw driver, remove the
single screw at the top rear of the enclosure.