Auger control, Drive control, Operation – Craftsman 247.88955 User Manual

Page 13: Chute directional control

Advertising
background image

13

OPERATION

tHrottLe ControL

The throttle control is located on the rear of the engine. It regulates the
speed of the engine and will shut off the engine when moved into the
STOP position.

Primer

Depressing the primer forces fuel directly into the
engine’s carburetor to aid in cold-weather starting.

reCoiL starter HandLe

This handle is used to manually start the engine.

eLeCtriC starter bUtton

Pressing the electric starter button engages the engine’s electric
starter when plugged into a 120V power source.

eLeCtriC starter oUtLet

Requires the use of a three-prong outdoor extension cord (included)
and a 120V power source/wall outlet.

oiL fiLL

Engine oil level can be checked and oil added through the oil fill.

gas CaP

Unthread the gas cap to add gasoline to the fuel tank.

aUgers

When engaged, the augers rotate and draw snow into the auger
housing.

CHUte assembLy

Snow drawn into the auger housing is discharged out the chute
assembly.

aUger ControL

The auger control is located on the left handle. Squeeze the control
grip against the handle to engage the augers and start snow throwing
action. Release to stop.

driVe ControL/ aUger ControL LoCk

The drive control is located on the right handle. Squeeze the control
grip against the handle to engage the wheel drive. Release to stop.
Release both controls to stop the augers and wheel drive.

NOTE: Always release the drive control before changing speeds.
Failure to do so will result in increased wear on your machine’s drive
system.

CHUte direCtionaL ControL

The chute directional control is located on left side of the snow thrower.
To change the direction in which snow is thrown, turn chute directional
control as follows:

Crank clockwise to discharge to the left.

Crank counterclockwise to discharge to the right.

skid sHoes

Position the skid shoes based on surface conditions. Adjust upward
for hard-packed snow. Adjust downward when operating on gravel or
crushed rock surfaces.

AUGER

CONTROL

GO

CHUTE DIRECTIONAL CONTROL

DISCHARGE

LEFT

DISCHARGE

RIGHT

ADJUSTABLE

CHUTE TILT

DRIVE

CONTROL

GO

Advertising