Vermont Casting RHE42 User Manual

Page 34

Advertising
background image

34

10000836

Vermont Castings, Majestic Products RHE Natural Vent Insert

B5 Cast Trim Options

Cast Surround and Flat Face

HECBL

Cast Surround Black

HECBLUE

Cast Surround Blue

HECCG

Cast Surround Charcoal Grey

HECGR

Cast Surround Green

CSSP

Polished Brass Small Trim for
Cast Surround

CSLP

Polished Brass Large Trim for Cast
Surround (to be used with CSSP)

B6 Freestanding Kits

Convert Insert Into A Freestanding Stove

NOTE: 1. Requires Bay Window Face Kit

2. Vent starter kit FSHEDVSK must be in

stalled to use any of the freestanding shells.

FSNVCSKB Classic Black Freestanding Cast Shell

FSNVCSKM Midnight Black Enamel Freestanding

Cast Shell

FSNVCSKG Green Enamel Freestanding Cast Shell

B7 Riser Kits

1. Install the unit according to Homeowner’s Manual.

2. Install the trim according to Installation Instructions.

3. Remove the two (2) screws at the bottom of the

trim.

4. Install the riser at the bottom of the trim. (Fig. 57)

5. Fasten the trim with the same two (2) screws

removed in Step 3.

NOTE: The riser kit should only be used with the
RHEBSL & RHEBXL trim.

Riser Trim Dimensions

Length A

Height B

Depth C

RHER1-Riser 1" 42" (1067mm) 1" (25.6mm) 2.55" (64.8mm)

RHER2-Riser 2" 42" (1067mm) 2" (50.9mm) 2.58" (65.6mm)
RHER5-Riser 5" 42" (1067mm) 5" (127.9mm) 2.58" (65.6mm)

B8 Arch Door Kits

HEADKA

Antique Brass Arch Door

HEADKP

Polished Brass Arch Door

C Trim Options for RHE42

C1 RHE42SSP and RHE42LP Trims

For use with RHEDV42

RHE42SSP

Small surround, black with thin polished
brass edge

RHE42LP

Large polished brass edge (to be used
with RHE42SSP)

Trim Assembly

RHE42SSP

1. Install trim channels (left and right sides). Use two

(2) screws to assemble each piece.

2. Slide on the trim top channel and fasten it from the

back side.

3. Install the trim top deflector. Use two (2) screws to

fasten it. (Fig. 58)

4. Remove ALL plastic protective covering from brass

trim.

RHE42LP

To install the kit you do not have to remove any piece
of brass, you just add the external pieces.

Remove the frame trim from the unit if it is already
installed.

B

C

A

Trim Kit

Riser
Decorative
Trim

FP1276

Fig. 57 RHEBSL, RHEBXL trim kit.

Side View

Trim Top Deflector

Trim Frame Top
Section

FP1261a

Fig. 58 Trim top deflector.

Advertising
This manual is related to the following products: