Home Legend Laminate Transitions - Manual (Page 4)

Doc.ID: 079 Effective: 4/17/2013
Title: Installation Laminate and Cork Stair Nose Rev.:2
Step 5.
Place the flooring on the tread. Press to ensure proper adhesion.
Allow to cure. Follow glue manufacturer’s instruction for actual cure
time.
Step 6.
Apply beads of glue on the tread in front of the U-track and on the
tongue of the floor.
Step 7.
Beginning at one end of the track, press the U-channel of the stair nose
into the U-track. Depress the stair nose into the construction adhesive
to ensure the bonding of the stair nose to the stair tread and the
tongue of the flooring. Allow the glue to cure.
Step 8.
Drill pilot holes on the stair nose. Two at each end about 2” from the
edge. The rest of the holes should be spaced at about 8 to 10 inches
apart. Drive 6d finishing nails through the holes. Counter sink the
nails.
Step 9.
Do finishing touches. Fill nail holes with color putty. Clean up.