CyberData 3COM VCX PBX User Manual
Page 13
Server Setup Guide
930288A
CyberData Corporation
13
7. After clicking on the Save Settings button, a reboot timer countdown will begin.
Figure 12. Reboot Timer
8. After the Intercom reboots, the green Status LED will blink at one second intervals to indicate
normal operation.
Note
If Yes is selected for Speaker Beep After Initialization on the Setup page of the
Intercom (not shown), you will hear a tone after the initialization sequence is complete.
9. To test the Intercom, complete the following steps:
•
Pick up any phone that is configured to the VCX system and call the Intercom’s extension
number.
•
When a connection is established (as indicated by a beep), speak into the phone and verify
that you can hear your voice through the Intercom.
•
Hang up the phone and press the Call Button on the Intercom.
•
When the phone rings, pick up the phone. Speak into the phone and verify that you can
hear your voice through the Intercom.
This step completes the procedure.