Driver memory seat — if equipped – Jeep 2006 Commander User Manual

Page 114

Advertising
background image

To Raise Rear Seat

1. Open the tailgate.

2. Detach pull strap from back of seat, and pull seatback
upward until it locks into place. Reattach strap.

3. Raise the head restraints.

4. Close the tailgate.

WARNING!

The cargo area in the rear of the vehicle (with the
rear seatbacks in the locked-up or folded down
position) should not be used as a play area by
children when the vehicle is in motion. They could
be seriously injured in an accident. Children should
be seated and using the proper restraint system.

DRIVER MEMORY SEAT — IF EQUIPPED
Once programmed, the memory buttons 1 and 2 on the
driver’s door panel can be used to recall the driver’s seat,
driver’s outside mirror, adjustable brake and accelerator
pedals, and radio station preset settings. Your Remote
Keyless Entry transmitters can also be programmed to
recall the same positions when the “Unlock” button is
pressed.

Pull Strap

114

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Advertising