Security alarm system - if equipped, Security alarm system — if equipped – Jeep 2007 Patriot User Manual

Page 31

Advertising
background image

1. If the key fob is equipped with a screw, remove the
screw. With the transmitter buttons facing down, use a
flat blade to pry the two halves of the transmitter apart.
Make sure not to damage the elastomer seal during
removal.

2. Remove and replace the batteries. Avoid touching the
new batteries with your fingers. Skin oils may cause
battery deterioration. If you touch a battery, clean it with
rubbing alcohol.

3. To assemble the transmitter case, snap the two halves
together.

NOTE:

If the key fob is equipped with a screw, reinstall

and tighten the screw until snug.

SECURITY ALARM SYSTEM — IF EQUIPPED

The system monitors the doors, liftgate, and ignition
switch for unauthorized operation.

If something triggers the alarm, the system will signal for
about 18 minutes. For the first 3 minutes the horn will
sound and the headlights, park lights, tail lights and the
indicator light in the cluster will flash. Then the exterior
lights will flash for another 15 minutes.

Separating Transmitter Halves

30

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising