Jeep 2008 Wrangler User Manual

Page 180

Advertising
background image

18. Before lowering the top, open the swing gate to
prevent possible damage to the rear center high-mounted
brake lamp. Gently slide the side bows off the door frame
track and lower the top down into the vehicle.

19. Tuck the fabric and the check straps between the
bows as far inside as possible. This will keep any portion
of the top from flapping outside of the vehicle.

20. Once the top is fully down, use the Velcro straps
provided to secure the top to the vehicle by wrapping the
strap around the side bows and through the slot on the
body.

21. Close the front header latches.

22. Remove door frames, if desired. Refer to “Door
Frame” in this section.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

179

3

Advertising