Jeep 2009 Grand Cherokee SRT - Owner Manual - Manual (Page 85)

Voice Recognition Button
Actual button location may vary with the ra-
dio. The individual buttons are described in the
“Operation” section.
The UConnect ௡ system can be used with any Hands-Free
Profile certified Bluetooth ௡ cellular phone. See the
UConnect
௡ website for supported phones. If your cellu-
lar phone supports a different profile (e.g., Headset
Profile) you may not be able to use any UConnect
௡
features. Refer to your cellular service provider or the
phone manufacturer for details.
The UConnect ௡ system is fully integrated with the vehi-
cle’s audio system. The volume of the UConnect ௡ system
can be adjusted either from the radio volume control
knob or from the steering wheel radio control (right
switch), if so equipped.
The radio display will be used for visual prompts from
the UConnect
௡ system such as ЉCELLЉ or caller ID on
certain radios.
Operation
Voice commands can be used to operate the UConnect
௡
system and to navigate through the UConnect ௡ menu
structure. Voice commands are required after most
UConnect
௡ system prompts. You will be prompted for a
specific command and then guided through the available
options.
• Prior to giving a voice command, one must wait for
the beep, which follows the
ЉReadyЉ prompt or another
prompt.
• For certain operations, compound commands can be
used. For example, instead of saying ЉSetupЉ and then
ЉPhone Pairing,Љ the following compound command
can be said:
ЉSetup Phone Pairing.Љ
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 83
3