Clock setting procedure, Electronic digital clock – Jeep 2009 Patriot - Owner Manual User Manual

Page 191

Advertising
background image

ELECTRONIC DIGITAL CLOCK

The clock and radio each use the display panel built into
the radio. A digital readout shows the frequency and/or
time in hours and minutes (depending on your radio
model), whenever the ignition switch is in the ON or
ACC position.

When the ignition switch is in the OFF position, or when
the radio frequency is being displayed, timekeeping is
accurately maintained.

On the AM/FM/CD (6-disc) radio, the time button
alternates the location of the time and frequency on the
display. On the AM/FM/CD (single-disc) radio, only one
of the two, time or frequency, is displayed.

Clock Setting Procedure

1. Press and hold the TIME button until the hours blink.

2. Adjust the hours by turning the TUNE/AUDIO con-
trol knob.

3. After the hours are adjusted, push the TUNE/AUDIO
control knob to set the minutes.

4. Adjust the minutes by turning the TUNE/AUDIO
control knob.

5. To exit, press any button/knob, or wait approximately
five seconds.

UNDERSTANDING YOUR INSTRUMENT PANEL

189

4

Advertising
This manual is related to the following products: