Jeep 2010 Wrangler Unlimited - Owner Manual - Manual (Page 159)

a. If the pivot brackets have been removed, unzip the
sport bar covers and attach the pivot brackets to the
sports bar with the four screws that were removed
using a #T30 Torx
௡ head driver. Re-cover and re-zip
the sport bar covers.
b. Lay the soft top into the rear of the vehicle with the
bows pointing forward and the curved portion of the
bows facing upward.
c. Reattach the knuckles onto the metal pivot brackets.
NOTE: To aid in reattaching the knuckles, you may
carefully tap on the knuckles using a rubber mallet.
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE