Jeep 2013 Wrangler - Owner Manual - Manual (Page 215)

Front Panel(s) Installation
NOTE: Set the panels on the windshield frame so that there
is no overhang. Also, make sure that the panels are sitting
flush with the body.
1. Install the right panel first, then the left panel.
2. Reinstall the panel(s) using the same steps for removal
in reverse order.
Front Panel(s) Installation With Rear Hard Top
Removed
1. Turn the left and right panels over and move the
spacer block (located on the rear of the panel) upward
90 degrees.
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 213